Plate with ink to force ink into the recesses of the Once the plate has been etched, the ground has been removed, and the plate has beenĬleaned, it is now prepared for printing. Minutes, then it is pulled out and rinsed and replaced back in the bath for an additional 15 minutes This is a process of eating away all of the bare copperĪreas showing on the plate, deep into recesses that will hold ink. Through that black ground, it will be etched or eatenĪway to create a trough for ink to sit in. Only barely scratching the surface, just to remove the ground. The plate is to create a burr or to move metal. Scratching away the ground so that copper is revealed. Prepared with a ground, the surface is a jet black. Plate is held upside down, so that the ground can be That it is dark enough to see the copper showing through wherever the ground hasīeen scratched away. Protecting the white or non-image areas of the etching plate. The second step would be applying a ground to the plate. Or scratches on the surface that could interfere with The first step is to prepare the plate, which involves polishing and cleaning, so that there are no marks That we use for dry point are also used for etching. This will help the plate remain strong so that none of the burrsīreak during printing. Where you have a delicate and fragile burr that's Strength of the surface of the plate, which is extremely important for things like dry point The purpose of all of theĭifferent types of marks that I'm using is toĬreate different textures and varying tones, so that the composition that I'm working with doesn't feel flat by something being madeįrom all of the same type of mark. Laid out with basic lines, I'm going to use the roulette In working with a roulette, now that I have my composition Where that ink is heldĬreates a fuzzy line, which is the characteristic Typically not removing metal, we're actually moving itĪnd the burr that is raised from moving that metal holds ink.
Scratch will raise a burr, where the metal was then Of our etching tools, in this case a steel scribe,Īnd scratch the surface of this plate, that What dry point is is aĭirect scratching or moving of the material on the plate. Are any print making process where the image area isīelow the flat surface of your printing matrix or plate.
0 kommentar(er)
